Details

---

Product Features：
●Uses piezoelectric acceleration transducer to convert vibration signal.
●In accordance with ISO 2954,GB13823.3, used for periodic measurements, to detect out-of-balance,misalignment and other mechanical faults in rotating machines.
●Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
●3 accelerators in 1 sensor for 3-axis vibration measurement.
●3 same parameters in one display for 3 dimensional measurement or 1 dimensional measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
●Bearing condition monitoring function.
●LCD digital display with back light.
●Lightweight and easy to use.
●Wide frequency range (10Hz.~10kHz.)
●Automatic power shut off to conserve power.
●AC output socket for headphones and recording.
●Optional headphones for use as electronic stethoscope.
●Optional software and cable for RS232C.
Product Application：
●Used for maintenance of mechanical equipment, such as fault diagnosis of bearings and gearboxes
●By plotting trend charts based on vibration parameters, it predicts fault times in advance, maximizes equipment utilization, and facilitates production by ordering spare parts and formulating maintenance plans simultaneously
●Monitor the vibration conditions of buildings, bridges, and other structures to ensure their structural safety and stability
 

Product Description

Technical Parameters：

Model	iVibra-6380
Vibration Sensor	3-Axis Piezoelectric accelerometer
Display	4 digit LCD backlit
Axial Vibration	any one axis of X , Y, Z or 3 axes of XYZ
Accuracy	±(5%n+2) digits
Measurement Range	Displacement	0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil
	Acceleration	0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s; 0.0-40g
	Velocity	0.01-400.0 mm/s True RMS; 0.04-16.00 inch/s
Frequency Range	Displacement	10Hz. ~ 1kHz.
	Acceleration	10Hz. ~ 10kHz
	Velocity	10Hz. ~1kHz.
Analogue Output	AC output 0~2.0V peak full scale(load resistance: above 10k)
With Max. value hold and low battery indication
Metric/ Imperial conversion
PC interface	RS232C   ( Cable and software is not included)
Power off	Manual off at any time or auto power off is enabled by user
Operating conditions	Temperature	0-50 ℃
	Humidity	below 95% RH
Power supply	2x1.5vAA (UM-3)Battery
Size	130x70x30mm
Weight	305g (Not including Batteries)

Standard Delivery

Name	Qty
Powerful rare earth magnet	1
3 Piezoelectric accelerometers in 1 sensor	1
Stinger probe (Cone)	1
Stinger probe (Ball)	1
Carrying case	1
Operational instruction manual	1

Optional Delivery

Name	Qty
Headphones for use as electronic stethoscope	1
Cable and software for RS232C or USB	1
Bluetooth	1