LS130 UV Energy Meter

Special for high pressure mercury lamp

Spectral response range: 315nm-400nm, λp = 365nm
Record real-time power, power maximum, energy value and curing time together
Provide PC software

LS130 is a UV energy meter that measures both UV energy and UV intensity. It is suitable for testing UV intensity and energy in light sources such as high-pressure mercury lamps and halogen lamps. It is recommended for use in UV curing machine, printing machine, exposure machine, UV dryer and other equipment.

A Chinese UV energy meter which ensure to pass the detection by the Chinese National Metrology Institute
An UV light integrator for simultaneous measurement of UV energy and UV intensity
Simultaneously display real-time power value, maximum power value, energy value and measurement time

An UV energy meter that can read data and graphs through special computer software and print test reports

Parameters

Parameter	LS130 UV Energy Meter
Spectral range	315nm-400nm, λp = 365nm
Irradiance measuring range	0-2000mW/cm²
Irradiance resolution	0.1mW/cm²
Energy measuring range	0-999999mJ/cm²
Measuring accuracy (H is the standard value)	H<5mW/cm²：±0.5mW/cm² H>=5mW/cm²：±10%H, ±5% (typical)
Sampling speed	2000 times/second
Irradiance data storage interval	32 times/second
Recording period	32 minutes
Power supply	4 AAA alkaline dry batteries
Display	240*160 Dot matrix LCD
Test Hole Diameter	Φ10mm
Dimension	160mm× 75mm×13mm(LWH)
Weight	303 g

Feature

Measure the UV power and energy emitted by the light source together

LS130 UV energy meter can measure UV power and energy at the same time. The meter can display real-time power value, maximum power value, energy value and measurement time. The measurement time can accurately show the UV curing time

Two measurement modes available

There are two measurement modes. One is Manual mode which needs to start up or end of measurement manually. Another is Automatic modes that can automatic switch-on or end of measurement when the energy intensity emitted by the light source is above or below the trigger threshold that can be set

Multiple high temperature protection barriers

Adopting metal shell and high temperature resistant design, the UV light integrator can run in the environment of 100 degrees Celsius for a long time. In addition, the instrument also provides a high temperature cover for users to choose. (the high temperature cover is not included as standard)

Offer free computer software

LS130 UV energy meter offers complimentary computer software that can be is connected through a USB interface. You can read detailed test data and print a test report when using software

Large LCD screen can display useful power curves

The large liquid crystal screen directly displays the power curve. The power curve can be used to analyze the intensity distribution of the light source. The front detector design facilitates the reading of data

LCD screen faces up during tests, making it easy to read the data

The detector is located on the same side of the screen and we can read data during the test

Qualifications and Standards

LS130 UV energy meter conforms to the following standard:

JJG 879-2015 Verification Regulation of Ultraviolet Radiometer

View more about Linshang LS130 UV Energy Meter on main site