Details

---

TM-3014   AC/DC Clamp Meter

 
This apparatus conforms to safety standard EN 61010

 

Application

It can be used for CURRENT and VOLTAGE measurements on installations of surge voltage category CAT IV 600 V, CAT III up to 1000 voltage between Phase and Earth (fixed installations) and for current measures up to CAT III 1000V/1200A CATIV 600V/1200A .

 

Features

The apparatus can perform the following measurements:

• AC current (IAC).
• AC voltage (VAC).
• DC voltage (VDC).
• Resistance.
• Continuity Test.
• Diode test.

Specifications

• Display:5/6 LCD with maximum reading 6600 units plus decimal point signs.
• Sample rate:2 times/sec.
• Conversion mode:mean value
• Jaws opening:40mm(TM-2012/2013) 50mm
• Dimension: 266mm(L)x93mm(W)x47mm(H).
• Weight:about 580g. (Including battery)

CHARACTERISTICS SPECIFICATIONS(23℃±5℃, below 75％RH )

DC Current
Range	Resolution	Accuracy	Overload Protection
660A	0.1A	±(1.5%+5)	1200A rms ( 60 second)
1200A	1A	±(2.0%+5)

 

AC Current
Range	Resolution	Accuracy (50~60 Hz)	Overload Protection
660A	0.1A	±(1.5%+10)	1200A rms ( 60 second)
1200A	1A	±(1.5%+5)

 

DC Voltage
Range	Resolution	Accuracy	Input impedance	OverloadProtection
6.6V	1mV	±(0.5%rdg+3 dgt)	11MΩ	DC 1000V  AC750Vrms
66V	10mV		10MΩ
660V	100mV
1000V	1V	±(0.8%rdg+3 dgt)

 

AC Voltage
Range	Resolution	Accuracy	Input impedance	OverloadProtection
6.6V	1mV	±(1.2%rdg+3 dgt)	11MΩ	DC 1000V  AC750Vrms
66V	10mV		10MΩ
660V	100mV
1000V	1V	±(1.5%rdg+4 dgt)

 

AC voltage  (TRUE RMS: from 10% to 100% of the range)
Range	Resolution	Accuracy	Input impedance	Overload Protection
6.6V	1mV	±(1.2%+10) 50Hz~500 Hz ± (1.5%+10) 500Hz~1KHz	11MΩ	DC 1000V  AC750Vrms
66V	10mV		10MΩ
660V	100mV
750V	1V	±(1.5%+5) 50Hz~500 Hz ±(2.0%+5)500Hz~1KHz
Input Impedance: 10MΩ// less than 100Pf. Crest factor :  >3:1.

 

Resistance
Range	Resolution	Accuracy	Input impedance	Overload Protection
660Ω	0.1Ω	±(1.0rdg+5dgt)	About 3.0VDC	DC 1000V  AC750Vrms
6.6KΩ	1Ω	±(1.0rdg+3dgt)	About 0.45VDC
66KΩ	10Ω
660KΩ	100Ω
6.6MΩ	1KΩ
66MΩ	10KΩ	±(3.0rdg+3dgt)

 

Continuity test
Range	Resolution	Accuracy	Input impedance	Overload Protection
	0.1Ω	<35Ω	About 1.2V	DC 1000V  AC750Vrms

 

Diode test
Range	Resolution	Max. Open Loop voltage	Overload Protection
	10mV	About3.0VDC	DC 1000V  AC750Vrms

 

Frequency” tests
Range	Resolution	Accuracy	Input impedance	Overload Protection
660Hz	0.1Hz	±(0.5%rdg+3 dgt)	>1.5VACrms  <5VACrms	DC 1000V  AC750Vrms
6.6Hz	1Hz
66KHz	10Hz
100KHz	100Hz

 

Capacitance Test
Range	Resolution	Accuracy	Overload Protection
6.6uF	0.001uF	±(2.0% rdg + 8dgt)	DC 1000V AC 750Vrms
66uF	0.01uF
660uF	0.1uF
6.6mF	1uF	±(5.0% rdg + 20dgt)
66mF	10uF