Details
Digital Level with Laser DL270LV
- 《DL270LV》
|
|
Only putting the instrument on the flat surface, it can show the angle in digital display.
For management of horizontal and vertical.
Unprecedented water and dustprood equivalent to IP54!
- ■V-cut
- Due to V-cut, it is stable on the pipe! It is very easy to manage gradient of pipes.
- ■Built-in magnet
- The built-in magnet is effective for steel frame, pipe and plant construction.
- ■Reversal LCD indication (180°)
- LCD indication reverses independently so that it enabled to manage gradient even at where it is difficult to peep the LCD.(At this time, LCD does not reverse.)
- ■Fixing indication function
- When it is difficult to read the display even you can touch the instrument, pushing the button makes the indication fix and you can read it later.
- ■Re-adjustment is possible
- When you have some trobles in accuracy, it is possible to re-adjust and confirm the accuracy at the operation site immediately.
- ■Angle and gradient indication
- Once you push a button, the indication unit will be changed alternatively to angle(°) or gradient(%).
- ■Comparison indication mode
- Setting your desiarable angle as 0°, it is possible to show the comparison with other angle.
- e.g.)When you set 0°at 30 °position in comparison mode, 50°in normal mode will be shown as 20°.
- ■Laser height :30mm
- Laser height is 30mm from the bottom. Very efficient for operation!
- ■Reversal LCD indication
- Horizontal and vertical directions will be shown by triangles located both sides of LCD. If you reverse the instrument up-side down, numbers on LCD also reverse. It avoides having mis-reading.
- ■Sound function
- When at 0°, 90°, 180°and 270°, it will inform you by buzzer sound.
Indication |
LCD indication (Convertible to °or %) with back light and reversible for 180°. 0°,90°,180°,270°(0% indication)Buzzer sound(Able to turn off.) |
Angle indication mode | Convertible to normal or comparison mode |
Detecting angle range | 360°(4 directions 90°and 4 directions 99.9% indication) |
Minimum indication | 0.1°or 0.1% |
Detecting accuracy |
When 0°,90°,180°,270°, it is ±0.1° When others, it is ±0.2° |
Laser source | 635nm Red color semi-conductor laser |
Output | Under 1mW Class 2(JIS C6802:2005) |
Laser emission accuracy | ±2mm/5m |
Laser beam diameter | About φ3mm at 5m distance (Indoor lightness at 200~300LX) |
Laser operational range |
About 30m(Indoor)※This is the reaching distance under the general lightness. About 10m(Outdoor)※It will deteriote under strong sunshine. |
Operational temperature range | -10℃~+45℃ (without dew) |
Power supply | AAA dry cell battery x 3 pcs |
Continuous operating hours |
When laser is on: about 20 hours When laser is off: about 50 hours |
Automatic power off | ○ About 20 mins after the last operation |
Water and dustproof | Equivalent to IP54 |
Size/Weight | 270×30×55mm 559g(Including battery) |
View more about STS DL-270LV Digital Angle Meter on main site