Correct tripod setup is one of the most basic but important steps in professional surveying.

 

Even when using a high-quality total station, an incorrectly positioned tripod can create instability and make instrument levelling more difficult.

 

The Myzox SDX-YL Aluminium Survey Tripod features a square-leg construction designed for high torsional rigidity. To obtain the full benefit of a stable tripod, surveyors should also follow proper field setup procedures.

 

Step 1: Choose a Suitable Survey Point

 

Before opening the tripod, inspect the ground.

 

Whenever possible, avoid locations that are:

 

Extremely soft

 

Loose or unstable

 

Close to heavy machinery

 

Subject to continuous vibration

 

Likely to be disturbed by vehicles or workers

 

For construction surveying in Malaysia, ground conditions can change quickly after rain, so always reassess the survey point before setting up.

 

Step 2: Open the Tripod Legs

 

Spread the Myzox SDX-YL legs sufficiently to create a stable base.

 

Avoid positioning the legs too close together simply to save space.

 

A properly spread tripod provides better stability and reduces the risk of accidental movement.

 

Step 3: Adjust the Working Height

 

Set the tripod to a comfortable working height before mounting the instrument.

 

Consider the operator's eye level and the type of surveying work being performed.

 

Avoid extending the tripod unnecessarily high when the application does not require it.

 

Step 4: Secure Every Tripod Leg

 

Make sure each tripod leg is properly locked.

 

Never assume a lock is secure simply because the tripod appears stable.

 

Check each leg individually before installing the surveying instrument.

 

Step 5: Position the Tripod Feet Firmly

 

On suitable soil, ensure the tripod feet have firm contact with the ground.

 

On hard surfaces such as concrete, check that the feet cannot easily slide.

 

The objective is simple:

 

The tripod must remain in the same position throughout the survey.

 

Step 6: Mount the Surveying Instrument

 

Install the compatible surveying instrument securely onto the tripod.

 

Before releasing your hands from the instrument, confirm that it is correctly attached.

 

This is especially important when handling expensive total stations or theodolites.

 

Step 7: Level the Instrument

 

After mounting, perform the normal levelling procedure required by your surveying instrument.

 

The tripod should already be reasonably positioned before using the instrument's fine levelling adjustments.

 

Step 8: Rotate and Recheck

 

This step is sometimes overlooked.

 

Slowly rotate the surveying instrument through different directions and observe whether the setup remains stable.

 

The Myzox SDX-YL square-leg construction is designed with high torsional rigidity, helping provide a stable platform during instrument rotation.

 

Step 9: Monitor the Setup During Surveying

 

Do not assume that a tripod will remain stable indefinitely.

 

During longer surveys, periodically check the instrument level and tripod position, especially when working on:

 

Soft ground

 

Recently filled soil

 

Road shoulders

 

Construction sites

 

Areas affected by machinery vibration

 

If the tripod settles, measurements taken afterward may be affected.

 

Common Tripod Setup Mistakes

 

Avoid these common mistakes:

 

Legs too close together → Loose locks → Poor ground contact → Instrument mounted before stability check → Working beside strong vibration → No recheck after rotation

 

Good surveying practice starts before the first measurement is taken.

 

Myzox SDX-YL Malaysia

 

The Myzox SDX-YL provides professional surveyors with a square-leg aluminium tripod designed for stable field use.

 

For total station tripod selection, instrument compatibility or surveying accessories in Malaysia, contact MTM Precision.

 

Contact MTM Precision Malaysia

 

MTM Precision Sdn Bhd

 

📱 WhatsApp: +6016-660 7346

📧 Email: mtmpre@yahoo.com

🌐 Website: www.mtmpre.com.my

 

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Serving surveying customers across Selangor, Kuala Lumpur, Johor, Penang, Melaka, Negeri Sembilan, Pahang, Kedah, Perlis, Kelantan and Terengganu.

 

Myzox SDX-YL Malaysia | How to Set Up Survey Tripod | Total Station Setup Malaysia | Square Leg Tripod | Surveying Equipment Malaysia