Linshang LS200 for Window, Door and Building Glass Inspection Malaysia

 

Measuring glass before installation is usually straightforward. The challenge begins after the glass has already been fitted into a window, door, partition or building fa莽ade.

 

The glass edge may be hidden inside the frame, while access to the opposite side may be restricted.

 

The Linshang LS200 Glass Thickness Meter is designed for this type of application.

 

Using the laser reflection principle, the Linshang LS200 allows glass thickness to be measured from one side. It can also measure the glass thickness and air interlayer thickness of insulated glass simultaneously.

 

For window contractors, glass installers, building inspectors and maintenance companies in Malaysia, this provides a practical method for checking existing glazing without first removing the glass.

 

Why Is Installed Glass More Difficult to Inspect?

 

Before installation, technicians can normally access the edge of a glass panel.

 

After installation, the situation changes.

 

Glass edges may be covered by:

 

Aluminium window frames

 

Door frames

 

Glazing beads

 

Sealants

 

Structural framing

 

Curtain wall systems

 

This can make conventional direct thickness measurement difficult.

 

The problem is even greater when the opposite side of the glass cannot be accessed conveniently.

 

A measuring method that works from one side can therefore be particularly valuable for field inspection.

 

Linshang LS200 for Window Glass Inspection

 

Windows are one of the most obvious applications for the Linshang LS200 Glass Thickness Meter.

 

Consider an existing commercial building.

 

A maintenance contractor needs to identify the thickness of several window panels, but the original building specifications are unavailable.

 

Because the glass is already fitted into aluminium frames, its edges cannot be measured conveniently with a conventional mechanical gauge.

 

The LS200 allows the contractor to carry out the measurement from the accessible glass surface using laser reflection.

 

Linshang LS200 for Glass Door Inspection

 

Glass doors present a similar situation.

 

Depending on the design, the glass may be secured within frames or fittings that make direct edge measurement inconvenient.

 

The Linshang LS200 can provide a practical solution for investigating the glass thickness without requiring access to both sides of the material.

 

Potential applications include:

 

Commercial glass doors

 

Office entrances

 

Shopfront doors

 

Interior glass doors

 

Framed glass doors

 

Existing replacement projects

 

This can be useful when preparing for repair, renovation or replacement work.

 

Linshang LS200 for Building Glass Inspection

 

Modern buildings may contain significant amounts of glazing.

 

Examples include:

 

Office buildings

 

Shopping centres

 

Hotels

 

Condominiums

 

Factories

 

Hospitals

 

Educational buildings

 

Retail outlets

 

Commercial properties

 

During maintenance or renovation, the original glazing information may not always be available.

 

The Linshang LS200 Glass Thickness Meter provides building inspection teams with a portable way to investigate existing glass directly on site.

 

Linshang LS200 for Insulated Windows

 

Many modern window systems use insulated glass.

 

These systems contain glass layers separated by an air interlayer.

 

For this type of glazing, knowing only the total construction thickness may not provide enough information.

 

The Linshang LS200 can be used to determine:

 

Glass thickness

 

Air interlayer thickness

 

and these can be measured simultaneously through the instrument's scale-reading method.

 

This makes the LS200 particularly relevant for double-glazing and insulated-window inspection.

 

Glass Thickness Scale: 70 mm

 

The Linshang LS200 provides a:

 

Glass Thickness Scale: 70 mm

 

The reflected laser positions are observed against the scale to determine the relevant glass thickness.

 

The scale-reading design keeps the measurement process straightforward for on-site applications.

 

Air Space Scale: 34 mm

 

For insulated glass, the instrument also provides an:

 

Air Space Scale: 34 mm

 

This allows the spacing between glass layers to be determined.

 

For window companies and replacement contractors, this information can be useful when identifying an existing insulated glass configuration.

 

Application Scenario: Window Replacement

 

Suppose a contractor receives a request to replace damaged glazing in an older office building.

 

The customer does not have the original window specification.

 

The contractor needs to investigate the existing glazing before preparing the replacement.

 

Because the glass edges are concealed inside the window frame, direct mechanical measurement may be difficult.

 

The Linshang LS200 can be placed on the accessible side of the glass to help determine the relevant glass and air-space dimensions.

 

This gives the contractor additional information before proceeding with the replacement work.

 

Application Scenario: Building Maintenance

 

Facility management teams often maintain buildings that were constructed many years earlier.

 

Over time, original drawings, specifications or supplier information may become difficult to locate.

 

When glazing needs maintenance or replacement, technicians may need to inspect the existing installation directly.

 

A portable glass thickness meter can therefore become a useful part of the building maintenance toolkit.

 

The LS200 is particularly suitable when dismantling the existing glazing simply for measurement would be inefficient.

 

Application Scenario: QA/QC Inspection

 

Construction QA/QC teams may also need to verify glazing during project inspection.

 

Depending on the installation stage, the glass edge may no longer be easily accessible.

 

The Linshang LS200 provides an alternative measurement method based on laser reflection.

 

This can complement other inspection tools used by construction and glazing professionals.

 

Application Scenario: Curtain Wall and Fa莽ade Glass

 

Building fa莽ades create one of the clearest reasons for one-side glass measurement.

 

Reaching the exterior surface of fa莽ade glass may require additional access equipment.

 

For a basic glass thickness inspection, this may be unnecessary if the measurement can be performed from the accessible side.

 

The Linshang LS200 Glass Thickness Meter is therefore relevant for certain curtain wall and fa莽ade inspection applications.

 

Who Can Use the Linshang LS200?

 

The LS200 can be considered by:

 

Window contractors

 

Door contractors

 

Glass installers

 

Glass suppliers

 

Glass manufacturers

 

Building inspectors

 

Construction QA/QC personnel

 

Fa莽ade contractors

 

Curtain wall specialists

 

Property maintenance companies

 

Facility management teams

 

Renovation contractors

 

Glass replacement companies

 

Why Carry a Linshang LS200 for Site Work?

 

For field work, the measurement problem is often not the glass itself.

 

The problem is access.

 

Once the glass is installed, a simple thickness measurement can become difficult because the edge is hidden.

 

The Linshang LS200 addresses this situation with:

 

Laser reflection measurement

 

One-side glass measurement

 

Installed-glass inspection capability

 

Glass thickness measurement

 

Air interlayer measurement

 

70 mm glass thickness scale

 

34 mm air-space scale

 

This makes it a practical instrument for professionals who regularly inspect existing glazing.

 

Linshang LS200 Glass Thickness Meter Supplier Malaysia

 

If your company works with windows, glass doors, insulated glass, building fa莽ades or existing glazing, the Linshang LS200 can provide a convenient method for measuring glass where conventional edge measurement is difficult.

 

MTM Precision supplies professional testing and measurement instruments for construction, industrial and inspection applications in Malaysia.

 

Contact us for enquiries about the Linshang LS200 Glass Thickness Meter Malaysia and its suitability for your glass inspection application.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

 

Showroom & Service Centre

 

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346

 

Contact MTM Precision for Linshang LS200 Glass Thickness Meter Malaysia.